Using the External RJ45 OOB Interface - UG1671

IPsec_GW Reference Pipeline User Guide (UG1671)

Document ID
UG1671
Release Date
2024-02-15
Revision
1.1 English

If the DSC has an external RJ45 OOB interface you can connect it to the management network, configure it, and use it to copy images:

  1. Ensure the oob_mnic0 interface is up:
    ifconfig oob_mnic0
    If you get no output:
    • Run the following command:
      dhclient oob_mnic0
    • Boot `gold-fw` if needed.
  2. Use scp to copy the image over the out of band interface to the /data directory on the card:
    scp user@server://~dsc_fw_elba.tar