Using the External RJ45 OOB Interface

SDN Policy Offload Reference Pipeline User Guide (UG1668)

Document ID
Release Date
1.1 English

If the DSC has an external RJ45 OOB interface you can connect it to the management network, configure it, and use it to copy images:

  1. Ensure the oob_mnic0 interface is up:
    ifconfig oob_mnic0
    If you get no output:
    • Run the following command:
      dhclient oob_mnic0
    • Boot `gold-fw` if needed.
  2. Use scp to copy the image over the out of band interface to the /data directory on the card:
    scp user@server://~dsc_fw_elba.tar