Guidance When Using Python-Based XRF4 Firmware with Previous (XRF4 Supported) DFE Versions - Guidance When Using Python-Based XRF4 Firmware with Previous (XRF4 Supported) DFE Versions

Guidance When Using Python-Based XRF4 Firmware with Previous (XRF4 Supported) DFE Versions - Guidance When Using Python-Based XRF4 Firmware with Previous (XRF4 Supported) DFE Versions - UG1614

XRF4 RF Accessory Kit User Guide (UG1614)

Document ID

UG1614

Release Date

2025-12-02

Revision

1.3 English

To Python-based versions of XRF4 firmware, follow below steps:

Power ON XRF4 with latest SD card image.
Connect the USB serial cable and configure COM port to 115200 baud.
Note: This provides embedded Linux terminal access.
Login using PetaLinux as the user and plnx as the password.
Execute the
```
xrf4-startup switch
```
command.
Run DFE v10.0 or older and connect as host.

To get more details on using the console application with an older version, refer to an older version of this document.