SD1_3.0

VEK280 Evaluation Board User Guide (UG1612)
Document ID
UG1612
Release Date
2024-01-31
Revision
1.1 English

To boot from a SD card installed in microSD card socket J302:

  1. Store a valid XCVE2802 device boot image file on a microSD card. Plug the SD card into the VEK280 evaluation board SD socket J302 connected to the XCVE2802 U1 bank 501 MIO SD interface.
  2. Set boot MODE SW1 for SD1_3.0 as indicated in the table in Versal Device Configuration.
  3. Power-cycle the VEK280 board or press the POR pushbutton SW2. SW2 is near the USB-C JTAG port J369 in the figure in Board Component Location.