GTYP200/201: FPGA Mezzanine Card Interface

VEK280 Evaluation Board User Guide (UG1612)

Document ID
Release Date
1.1 English

[Figure 1, callout 20]

Warning: The VEK280 board can only be used with FMC cards that can support 1.5V. The VEK280 board exposes FMC add-on cards requiring lower than 1.5V levels to this higher voltage. See LPD MIO[23]: VADJ_FMC Power Rail.

The detailed Versal device connections for the feature described in this section are documented in the VEK280 board XDC file, referenced in Xilinx Design Constraints.