Firmware Upgrade

Enhanced PTP User Guide (UG1602)

Document ID
UG1602
Release Date
2023-04-07
Revision
1.1 English
Important: The sfptpd daemon must be terminated before upgrading the adapter firmware. Following firmware upgrade the adapter driver should be reloaded.
  • If onload is installed:
    # onload_tool reload
  • If onload is not installed:
    # modprobe -r sfc
    # modprobe sfc
Important: The ethtool -t command is disruptive, and should not be used while sfptpd is running. It takes the interface offline, and so interrupts service to it. It also resets the adapter clock back to the UTC epoch.