SD1_3.0

VPK180 Evaluation Board User Guide (UG1582)
Document ID
UG1582
Release Date
2023-05-10
Revision
1.1 English

To boot from a SD card installed in microSD card socket J302:

  1. Store a valid XCVP1802 device boot image file on a microSD card. Plug the SD card into the VPK180 evaluation board SD socket J302 connected to the XCVP1802 U1 bank 501 MIO SD interface.
  2. Set boot MODE SW1 for SD1_3.0 as indicated in the table in Versal Device Configuration.
  3. Power-cycle the VPK180 board or press the POR pushbutton SW2. SW2 is near the USB-C JTAG port J369 in the figure in Board Component Location.