The SuC SWI provides access to the NXP satellite controller when supported by the card. It is compatible with Segger JLINK [Ref 3] or LPC Link2 debuggers [Ref 4]. The header provides the SuC SWDIO voltage reference on the card.
Note: Programming the SuC or
SoC firmware/flash using the ADK2 might void warranty and should only be performed
by qualified experts or under factory guidance.
| Signal | Pin | Pin | Signal |
|---|---|---|---|
| SUC_VREF | 1 | 2 | ucSWDIO |
| GND | 3 | 4 | ucSWCLK |
| GND | 5 | 6 | ucSWO |
| NC | 7 | 8 | NC |
| GND | 9 | 10 | ucRST |