The debug module has multiple interfaces, providing access to a host computer and/or other third-party debugger tools. The following figure shows the various interfaces and locations on the debug module.
Figure 1. ADK2 Debug Module
Note: Some features are reserved and
functionality might change depending on the connected card. See Debug Module and card specific
documentation for more information.
The following table describes each connector call-out in Figure 1, listing connector descriptions and links to supported off-the-shelf debuggers (if applicable). Refer to Debug Module Connectors for pinout descriptions for each connector.
| Call-out | Interface Name | Connector Description | Compatible External Tool |
|---|---|---|---|
| A | SmartLYNQ | 14-pin header Molex 0878321420 | AMD SmartLynq Data Cable |
| B | SoC JTAG | 10-pin header Harwin M22-5320505 | Arm® SoC JTAG Header, compatible with NXP CodeWarrior |
| C | SMBus | 10-pin header Molex 15-91-0100 | Total Phase Aardvark or Beagle I2C Monitor |
| D | SuC JTAG | 10-pin header SAMTEC FTSH-105-01-F-D-K | TI MSP debugger |
| E | SuC SWI | 10-pin header SAMTEC FTSH-105-01-F-D-K | Segger J-link or LPC Link2 debugger |
| F | Proj | Reserved | Reserved |
| G | COM UART | 4-pin header Amhhenol 10147605-00004LF | Reserved |
| H | COM USB | 4-pin header Amhhenol 10147605-00004LF | Reserved |
| I | PMBus | 6-pin header Amphenol 68021-406HLF | Renesas PMBus Dongle |
| J | Micro USB | Provides debug module power and host connection. Must be connected. | N/A |
| K | USB A | USB A connector Wurth 629104190121 | Reserved |
| L | ADK2 Debug Connector | Keyed connection for the flex cable. | N/A |