The debug module provides support for up to 16 analog test points to allow for card monitoring during operation. The following table provides debug module pinout. See card specific documentation for analog test point details.
| Pin | Signal Name | Voltage Divider |
|---|---|---|
| A29 | ADC0_IN0 | 1 |
| B29 | ADC0_IN1 | 1 |
| A28 | ADC0_IN2 | 1 |
| B28 | ADC0_IN3 | 1 |
| A27 | ADC0_IN4 | 1 |
| B27 | ADC0_IN5 | 1 |
| A26 | ADC0_IN6 | 1 |
| B26 | ADC0_IN7 | 1 |
| A25 | ADC1_IN0 | 1 |
| B25 | ADC1_IN1 | 1 |
| A20 | ADC1_IN2 | 1 |
| B20 | ADC1_IN3 | 2 |
| B9 | ADC1_IN4 | 2 |
| A9 | ADC1_IN5 | 2 |
| B1 | ADC1_IN6 | 2 |
| A1 | ADC1_IN7 | 2 |