Now program the FPGA with a conversion bundle:
- Download one of the following conversion packages from the X3522 conversion website (see NIC to PV Conversion Website):
- XN-201355-LS Alveo X3 PV Conversion [RPM package], recommended for Red Hat, SUSE, or CentOS.
- XN-201356-LS Alveo X3 PV Conversion [Debian package], recommended for Ubuntu or Debian.
- Install the conversion package that you downloaded.
Refer to Install the Update Files for the procedure to follow.
- Program the FPGA with the x3522pv_signed.update conversion bundle that was installed from the
conversion package.
Refer to Program the FPGA for the procedure to follow.
Important: You must perform the step in this procedure that instructs you to do a full cold reboot. If you do not, the conversion process might fail. - List the PCIe devices that have the
vendor ID used by an X3522. Confirm that the
device that you updated is now shown as a Processing accelerator with device ID
5074:
If so, you have successfully converted the card to an X3522PV adaptable accelerator card.# lspci -D -d 10ee 0000:01:00.0 Processing accelerators: Xilinx Corporation Device 5074