Cross probing helps you correlate the waveforms in the viewer to the wires in the Vitis Model Composer model.
You can cross probe signals between the Waveform Viewer and the model in the following ways:
- To cross probe a signal from the Waveform Viewer to the Model Composer model,
select one or more signal names in the Waveform Viewer. Use Shift+click or
Ctrl+click to select multiple signal names (press Ctrl+A to select all).
The Model Composer model highlights the selected signals in orange.
To unhighlight a signal you have highlighted in the Model Composer model, Ctrl+click the signal name in the Waveform Viewer. The signal does not highlight in the Model Composer model.
- Follow these steps to cross probe a signal from the Model Composer
model to the Waveform Viewer:
- With the Waveform Viewer open, select a signal in the Model
Composer model.
You can also select multiple signals by using Shift+click to select additional signals.
- Right-click one of the selected signals in the Model
Composer model and select AMD Highlight in
Viewer in the right-click menu.Note: If you select a signal that does not appear in the Waveform Viewer, AMD Highlight in Viewer does not appear in the popup menu.
- Observe that the Waveform Viewer highlights the names of the signals you selected.
- With the Waveform Viewer open, select a signal in the Model
Composer model.