NoC simulation support is provided with behavioral models in either SystemVerilog or SystemC. The simulation time with the SystemC model is much faster but is cycle approximate and less accurate compared to the SystemVerilog model.
Note: You can select your preferred simulation
model using the IP Project Settings. Use the
rtl setting for SystemVerilog and the
tlm setting for SystemC. These settings
apply to the entire project.
Although you can use both the SystemC and SystemVerilog models to verify functionality, the SystemVerilog model is recommended for performance analysis. Performance analysis using the SystemVerilog model is within ±5% of hardware.
You can simulate the NoC using simulators in the Vivado tools or using the hardware emulation flow provided by the Vitis tools.
Important:
For
more information on the NoC simulation settings and performance tuning, see this
link and this link in the
Versal Adaptive SoC
Programmable Network on Chip and Integrated Memory Controller LogiCORE
IP Product Guide (PG313).
For more information on the AXI Traffic Generator, see the Versal Network on Chip Performance AXI Traffic
Generator Tutorials available from the GitHub repository.