Debugging Configuration - 2024.1 English

Versal Adaptive SoC System Integration and Validation Methodology Guide (UG1388)

Document ID
UG1388
Release Date
2024-06-19
Version
2024.1 English

For information on debugging configuration, see the Versal Device Programming/Booting Debug Checklist, which contains a general checklist of requirements, actions, and points to be considered when debugging Versal device configuration and booting. You can use this checklist to debug a first-time load of a basic programmable device image (PDI) on a new Versal board.

After the JTAG Boot Mode loading of the PDI is successful, the next step is to program and boot from the target boot device. If you are not using JTAG boot mode, see the Versal Adaptive SoC Boot and Configuration Design Hub (DH266) for other related resources and checklists, such as the SelectMAP Boot Checklist.