get_noc_interfaces - 2025.2 English - UG1387

The get_noc_interfaces command provides the list of all the available NMU/NSU interfaces present in the design from all design sources, including: DCPs, Block Designs, RTL files, and EDIF netlists. Prior to making NoC connections in the XDC file, you can take the reference of the get_noc_interfaces command by executing it in the Tcl Console. The following code snippet shows the output of the get_noc_interfaces when executed in the Tcl Console.

Figure 1. get_noc_interfaces Code Example

The get_noc_interfaces has the following command-line switches:

-mode

Filters the NoC interfaces by mode. Valid values are NMU and NSU. The following code snippet shows the -mode switch usage.

Figure 2. -mode Code Example

-type

Filters the NoC interfaces by type. Valid values are AXIMM and AXIS and the default value is AXIMM. The following code snippet shows the -type switch usage.

Figure 3. -type Code Example

-category

Filters the NoC interface by category. Default is PL. The following code snippet shows the -category switch usage.

Figure 4. -category Code Example

To report all the properties of the NoC interface, you can use the report_property –all command for the NoC interface in the Vivado Tcl Console.

Figure 5. -all Code Example