You can configure the QoS properties of every path in the AXI NoC IP using the
QoS tab. You can also define the properties on the NoC connections created in the XDC
file. Use the set_property command for the Modular NoC
flow.
If the NoC connections have no defined properties, the tool uses the
default values for the properties. The editable properties for a connection are
Read/Write Bandwidth, Read/Write Average Burst, and Exclusive routing groups. In the
XDC, use the set_property command to configure the QoS
properties, as well as addressing apertures and NoC addressing remaps.
For information on the QoS properties, refer to the Versal Adaptive SoC Programmable Network on Chip and Integrated Memory Controller LogiCORE IP Product Guide (PG313).
For Versal AI Edge Series Gen 2 and Versal Prime Series Gen 2, refer to the following documents: