Synthesize and Implement the Example Design - 2023.2 English

Vitis Networking P4 Getting Started Guide (UG1373)

Document ID
Release Date
2023.2 English
To synthesize the FiveTuple example design in the AMD Vivado™ Design Suite after compiling it, (as described in the Compile an Example Design and Run a Simulation section), complete the following steps:
  1. Click Run Synthesis under SYNTHESIS in the panel on the left. Click OK in the Launch Runs window that appears.
  2. After completion of synthesis, run implementation by selecting Run implementation in the Synthesis Completed window.

  3. To view implementation results select Open Implemented Design in the Implementation Completed window.

  4. A bitstream can be created with an appropriate top-level wrapper file and a .xdc file containing pin-out constraints. The system can be run on any board with a supported device. Note other IP such as a 100G MAC are normally required to get the system up and running on a board.