- Double-click Vitis Networking P4 to instantiate the IP (as described in previous section).
- Check the Select P4 Example box and select an example
design (for example, Five Tuple) from the
drop-down P4 Example menu.
See Vitis Networking P4 User Guide (UG1308), Chapter 3, for descriptions of the various tabs in the GUI.
- In the Generate Output Products window, click Skip.
- Right-click vitis_net_p4_0 in the
Sources window, click Open
IP Example Design, then click OK in the next
window.
- In the new Example Design Vivado project, click Run Simulation under Simulation in the panel on the left. This launches the XSim simulator, the default simulator used in the AMD Vivado™ Design Suite. See Vitis Networking P4 User Guide (UG1308), Chapter 3 for information on how to change the target simulator.
- The simulation is run for a maximum of 10 μs.
- Users can review the operation of the system in waveforms. Output packets are compared against the behavioral model if desired.