Start the Vivado Design Suite.
In the Vivado Quick Start page, click Create Project to open the New Project wizard.
Use the following information in the table to make selections in each of the wizard screens.
Table 1: System Property Settings
Wizard Screen System
System Property
Setting or Command to Use
Project Name
Project Name
edt_versal
Project Location
C:/edt
Create Project Subdirectory
Leave this checked
Project Type
Specify the type of project to create. You can start with RTL or a synthesized EDIF
RTL Project
Do not specify sources at this time check box
Leave this unchecked
Project is an extensible Vitis platform checkbox
Leave this unchecked
Add Sources
Do not make any changes to this screen
Add Con straints
Do not make any changes to this screen
Default Part
Select
Boards
Display Name
Versal VMK180/VCK190/VPK180 Evaluation Platform
Project Summary
Project Summary
Review the project summary
Note
Select Display Name as VPK180 Evaluation platform for creating project for SSI devices.
Click Finish. The New Project wizard closes and the project you just created opens in the Vivado design tool.
Note
Select the version based on the silicon on the board.For production silicon, select the board revision as Rev A01 with board file version as 1.2.