Default switch settings are listed in Table: Default Switch Settings. Switch locations are shown in This Figure.
|
Switch |
Function |
Default |
Comments |
This Figure Callout |
Schematic Page |
|---|---|---|---|---|---|
|
SW4 |
4-pole GPIO DIP |
[4:1] 0000 where 0 = On |
4-POLE USER DIP |
13 |
18 |
|
SW5 |
4-pole MODE DIP |
[4:1] 0001 where 0 = On |
MODE[0:2] DIP, 1-POLE USER DIP |
14 |
19 |
Table: Other Visible Switches and Connectors shows other visible switch and connector locations.
|
Component |
Function |
Comments |
This Figure Callout |
Schematic Page |
|---|---|---|---|---|
|
SW2 |
Pushbutton switch |
CPU_RESET_B |
15 |
18 |
|
SW3 |
Pushbutton switch |
PROGRAM_B |
16 |
18 |
|
J11 |
8-pin (2X4) male HDR |
MAXIM PMBus cable connector |
17 |
35 |
|
J2 |
14-pin (2X7) 2mm JTAG |
JTAG flat-cable connector |
8 |
19 |