Select the hello_a53 application project and select Build to build the application.
Select hello_a53 and select the settings icon beside the Run button in the flow tab.
Select New Launch Configuration
The Vitis Unified IDE creates the new run configuration, named
hello_a53_system_app_hw_1.The configurations associated with the application are pre-populated in the Main page of the launch configurations.
Review the settings in the launch.json file.
Note
The board should be in JTAG boot mode before power cycling.
Power cycle the board.
Click Run.
Hello World appears on the serial communication utility in Terminal 1.
Zynq MP First Stage Boot Loader Release 2025.1 Apr 22 2025 - 14:51:42 PMU-FW is not running, certain applications may not be supported. Hello World Successfully ran Hello World application
Note
No bitstream download is required for the above software application to be executed on the Zynq UltraScale+ evaluation board. The Arm Cortex-A53 quad-core is already present in the processing system. Basic initialization of this system to run a simple application is accomplised by the device initialization Tcl script.
Power cycle the board and retain the same connections and board settings for the next section.