Execute the following commands in the U-Boot console on the target terminal. These commands erase QSPI and then write the
boot.binimage from DDR to QSPI.ZynqMP> sf probe 0 0 0 ZynqMP> sf erase 0 0x4000000 ZynqMP> sf write 0x2000000 0 0x4000000
After successfully writing the image to QSPI, turn off the board and set up the ZCU102 board as described in Setting Up the ZCU102 Board. You can see Linux loading on the UART-0 terminal and the R5F application executing in the UART-1 terminal.