This tutorial targets the Zynq UltraScale+ ZCU102 evaluation board. The examples in this tutorial are tested using the ZCU102 Rev 1 board. To use this guide, you need the following hardware items, which are included with the evaluation board:
ZCU102 Rev1 evaluation board
AC power adapter (12 VDC)
USB Type-A to USB Micro cable (for UART communications)
USB micro cable for programming and debugging via USB-Micro JTAG connection
SD-MMC flash card for Linux booting
Ethernet cable to connect target board with host machine
Monitor with DisplayPort (DP) capability and at least 1080P resolution
DP cable to connect the display output from the ZCU102 board to a DP monitor