The following examples demonstrate the correct usage of the petalinux-package boot
command.
- Create a BOOT.BIN file for an AMD Versal™
device.
petalinux-package boot --format BIN --plm --psmfw --u-boot --dtb -o <PATH-TO-OUTPUT-WITH-FILE-NAME>
It generates BOOT.BIN, BOOT_bh.bin, and qemu_boot.img in images/linux directory. The default DTB load address is 0x1000. For more information, see Bootgen User Guide (UG1283).
petalinux-package boot --plm <PLM_ELF> --psmfw <PSMFW_ELF> --u-boot --dtb --load <load_address>
It generates a BOOT.BIN with a specified load address for DTB.
Note: The files versal-qemu-multiarch-pmc.dtb and versal-qemu-multiarch-ps.dtb are QEMU DTBs required to boot multi-arch QEMU. Use system.dtb for--dtb
option, generated in image/linux/ directory or simply use--dtb
option. - Create a BOOT.BIN file for an AMD Zynq™
device (including Zynq 7000 and AMD Zynq™
UltraScale+™ MPSoC).
petalinux-package boot --format BIN --fsbl <PATH-TO-FSBL> --u-boot -o <PATH-TO-OUTPUT-WITH-FILE-NAME>
- Create a BOOT.BIN file for a Zynq device that includes a PL bitstream and
FITimage.
petalinux-package boot --format BIN --fsbl <PATH-TO-FSBL> --u-boot --fpga <PATH-TO-BITSTREAM> --kernel -o <PATH-TO-OUTPUT>
- Create a x8 SMAP PROM MCS file for a
MicroBlaze™
CPU
design.
petalinux-package boot --format MCS --fsbl <PATH-TO-FSBL> --u-boot --fpga <PATH-TO-BITSTREAM> --flash-size <SIZE> --flash-intf SMAPx8 -o <PATH-TO-OUTPUT-WITH-FILE-NAME>
- Create a BOOT.BIN file for a Zynq UltraScale+ MPSoC that includes PMU
firmware.
petalinux-package boot --u-boot --kernel --pmufw <PATH_TO_PMUFW>
- Create bitstream file download.bit for a MicroBlaze CPU
design.
petalinux-package boot --format DOWNLOAD.BIT --fpga <BITSTREAM> --fsbl <FSBOOT_ELF>