Processing System Management Firmware (PSM) - 2023.2 English

PetaLinux Tools Documentation: Reference Guide (UG1144)

Document ID
UG1144
Release Date
2023-10-18
Version
2023.2 English

This is for AMD Versalâ„¢ adaptive SoC. This is mandatory. By default, the top-level system settings are set to generate the PSM.

If you had disabled PSM from menuconfig previously, you can configure the project to build PSM as follows:

  1. Launch top level system settings configuration menu and configure:
    petalinux-config
    1. Select the Linux Components Selection submenu.
    2. Select PSM firmware.
    3. Enter your settings.
    4. Exit the menu and save the change.
  2. Build the PSM when building the project:
    petalinux-build
  3. Build the PSM only:
    petalinux-build -c psm-firmware

The PSM ELF file is installed as psmfw.elf for Versal adaptive SoC in images/Linux inside the project root directory.

For more information on PSM, see Versal Adaptive SoC System Software Developers Guide (UG1304).