This section assumes that the following prerequisites are satisfied:
- You have a PetaLinux system image by installing a PetaLinux BSP (see Creating a Project Using PetaLinux BSP) or building your own PetaLinux project (see Building a System Image).
- If you wish to make use of prebuilt capability for JTAG boot. You need to have packaged prebuilt images (see Packaging Prebuilt Images).
- A serial communication program, minicom/kermit/gtkterm has been installed. The serial line is configured with default settings for 115200/8/N/1.
- Appropriate JTAG cable drivers to be installed on the target.