Open Source Bootgen for On-target Use for Zynq Devices, Versal Adaptive SoC, and Zynq UltraScale+ MPSoC - 2024.2 English - UG1144

If you want to build an open source Bootgen as part of the root file system, follow these steps.

1. Go to the PetaLinux project: cd <plnx-proj-root>
2. Run petalinux-config -c rootfs and select Filesystem Packages > Bootgen
3. Run petalinux-build

   Once the target is up, you can find the Bootgen binary in /usr/bin