- Copy the prebuilt Xen images to your TFTP directory so that you
can load them from U-Boot with
TFTP.
cd <plnx-proj-root> cp pre-built/linux/xen/xen.dtb <tftpboot>/ cp pre-built/linux/xen/xen-openamp.dtb <tftpboot>/ cp pre-built/linux/xen/xen-qemu.dtb <tftpboot>/ cp pre-built/linux/xen/xen-Image <tftpboot>/ cp pre-built/linux/xen/xen-rootfs.cpio.gz <tftpboot>/ cp pre-built/linux/xen/xen_boot_tftp.scr <tftpboot>/ cp pre-built/linux/xen/xen_boot_sd.scr <tftpboot>/ cp pre-built/linux/xen/xen <tftpboot>/
- Boot the prebuilt U-Boot image on the board with either JTAG boot
or boot from SD card. Note: For SD card boot, see Booting PetaLinux Image on Hardware with an SD Card and for JTAG boot, see Booting PetaLinux Image on Hardware with JTAG.
- Setup TFTP server IP from
U-Boot:
platform> setenv serverip <TFTP SERVERIP>
- Load Xen images from U-Boot.
- TFTP Boot
-
xen_boot_tftp.scr, to be loaded
at address
0xC00000
as shown:tftpb 0xC00000 xen_boot_tftp.scr; source 0xC00000
- SD Boot
-
xen_boot_sd.scr, to be loaded
at address
0xC00000
as shown:load mmc 0:1 0xC00000 xen_boot_sd.scr; source 0xC00000