--prebuilt <BOOT_LEVEL>
boots
prebuilt images (override all settings). Supported boot levels are 1 to 3. The
command for JTAG boot:
petalinux-boot jtag --prebuilt <BOOT_LEVEL> --hw_server-url hostname:3121
The command for the QEMU boot is as follows:
petalinux-boot qemu --prebuilt <BOOT_LEVEL>
Note: The QEMU boot does not support BOOT_LEVEL 1.
- Level 1: Download the prebuilt FPGA bitstream.
- It boots FSBL and PMU firmware for AMD Zynq™ UltraScale+™ MPSoC.
- It boots FSBL for AMD Zynq™ 7000 devices.
- Level 2: Download the prebuilt FPGA bitstream and boot the
prebuilt U-Boot.
- For Zynq 7000 devices: It boots FSBL before booting U-Boot.
- For Zynq UltraScale+ MPSoC: It boots PMU firmware, FSBL, and TF-A before booting U-Boot.
- For AMD Versal™ devices: It loads the required cdo files from .pdi file, PLM, PSM firmware, and TF-A before booting U-Boot.
- Level 3: Download and boot the prebuilt Linux
- For MicroBlaze™ processors: Downloads the prebuilt FPGA bitstream and boots the prebuilt kernel image on target.
- For Zynq 7000 devices: Downloads the prebuilt FPGA bitstream and FSBL, boots the prebuilt U-Boot, and boots the prebuilt kernel on target.
- For Zynq UltraScale+ MPSoC: Downloads prebuilt FPGA bitstream, prebuilt FSBL, prebuilt PMU firmware, prebuilt TF-A, prebuilt U-Boot and prebuilt kernel on target.
- For Versal devices: It loads the required cdo files from .pdi file, PLM, PSM firmware, TF-A, and U-Boot before booting Kernel.
Example to show the usage of boot level for prebuilt option:
petalinux-boot jtag --prebuilt 3