Several advanced fabrication technologies can be used to reduce the number of layers required to route a design.
Blind Vias
Unlike through-hole vias, which extend through the entire thickness of the PCB from the top layer all the way to the bottom layer, blind vias connect only an outer layer (either the top or bottom) to one or more inner signal layers without passing completely through the board. This selective connectivity enables designers to free up valuable routing space on the outer layers by avoiding the need to route signals through the entire board thickness. As a result, blind vias help improve signal density and reduce layer count, which can lead to smaller, more compact PCB designs.
Buried Vias
Buried vias are vias that connect only inner layers within the PCB stack-up and do not extend to the top or bottom surface layers. Because they are completely encapsulated inside the PCB, buried vias are not visible or accessible from the outside. Their primary purpose is to enable high-density interconnections between internal layers without occupying valuable surface real estate or interfering with surface-mounted components. Buried vias are particularly useful in multi-layer boards where signal integrity and routing complexity demand precise control of internal layer connections.
Via-in-Pad
Via-in-pad technology places a via directly within a component pad, such as those found on BGA packages. This method eliminates the need for “dog-bone” routing, where a signal trace extends from the pad to a nearby via on the outer layers. By situating the via right in the pad, the signal can travel directly from the component pin down to an inner layer, significantly simplifying the routing process under dense BGAs and other fine-pitch components.
This approach offers several advantages:
- Improved Routing Density
- Via-in-pad frees up surface routing space, allowing easier escape routes for signals, especially under BGAs where routing channels are extremely limited.
- Enhanced Signal Integrity
- Because the signal path transitions directly from the pad to an internal layer, the length of the top or bottom layer trace is minimized or eliminated, reducing parasitic inductance and capacitance. This improves impedance control and overall high-frequency performance.
- Better Thermal Performance
- Via-in-pad also helps with heat dissipation from components by providing a direct thermal path to internal or bottom layers.
However, via-in-pad requires specialized manufacturing processes such as via filling and plating to ensure flat, reliable pads suitable for soldering components. The following figure illustrates the mechanical design of a via-in-pad, showing the via embedded within the pad structure.