CTIINTACK (A53_CTI_1) Register Description
| Register Name | CTIINTACK |
|---|---|
| Offset Address | 0x0000000010 |
| Absolute Address | 0x00FED20010 (CORESIGHT_A53_CTI_1) |
| Width | 32 |
| Type | woWrite-only |
| Reset Value | 0x00000000 |
| Description | The CTI Interrupt Acknowledge Register is write-only. Any bits written as a 1 cause the ctitrigout output signal to be acknowledged. The acknowledgement is cleared when MAPTRIGOUT is deactivated. This register is used when the ctitrigout is used as a sticky output, that is, no hardware acknowledge is supplied, and a software acknowledge is required. |
CTIINTACK (A53_CTI_1) Register Bit-Field Summary
| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
| INTACK | 7:0 | woWrite-only | 0x0 | Acknowledges the corresponding ctitrigout output. There is one bit of the register for each ctitrigout output.When a 1 is written to a bit in this register, the corresponding ctitrigout is acknowledged and is cleared when MAPTRIGOUT is LOW. Writing a 0 to any of the bits in this register has no effect. |