Octad utilization for 80-bit, 2 Rank RDIMM with ECC is shown in the following figure. DQ is the bi-directional data bit, DQS_t/c is the differential data strobe, CK_t/c is the differential clock pair, CA indicates Command/Address bits, CS is Chip Select, reset_n is the reset input to the RDIMM, ALERT_N is a bi-directional signal to/from the RDIMM, PAR is the parity input to the RDIMM, LBDQ-S is the loopback Data output from RDIMM, and SYS_CLK indicates the System Clock pair.
Important: The octad utilization figure is
based on the pinout output by Vivado for this configuration.
Figure 1. Octad Utilization for 80-bit 2 Rank RDIMM with ECC
