Each device on a DIMM uses a 7-bit I2C slave address composed as follows:
I2C Slave Address = { LID[3:0], HID[2:0]
}
- LID[3:0] (bits 6:3)
- Local ID (LID) is a 4-bit component-type identifier fixed by the DIMM
manufacturer. All instances of the same device type on one DIMM share the
same LID. For example, RCD instances use
LID = 1011 (0xB). The PMIC and SPD on the same DIMM each have their own distinct LID. - HID[2:0] (bits 2:0)
- Host ID (HID) is a 3-bit board-level identifier unique per DIMM slot,
determined by the HSA pull-down resistor value. Because HID is three bits
(values
000–111), one PMC I2C bus supports a maximum of eight unique HID values.