The VCU2 guidance is to estimate performance primarily from pixel rate and chroma format.
FPS_target = FPS_ref x (W_ref x H_ref x
F_ref) / (W_target x H_target x F_target)
Where:
- W_ref, H_ref: reference width and height
- W_target, H_target: target width and height
- FPS_ref: known FPS for the reference mode
- F_ref, F_target: chroma format factors
Chroma format factors:
- 4:2:0 -> F = 1.5
- 4:2:2 -> F = 2
- 4:4:4 -> F = 3
Reference VCU2 operating points at 950 MHz:
- 4096 x 2160, 4:2:0, 12-bit @ 90 fps
- 4096 x 2160, 4:2:2, 12-bit @ 75 fps
- 4096 x 2160, 4:4:4, 12-bit @ 60 fps
Reference values to use:
For 4:2:0 estimates: W_ref = 4096, H_ref = 2160, FPS_ref = 90, F_ref = 1.5
For 4:2:2 estimates: W_ref = 4096, H_ref = 2160, FPS_ref = 75, F_ref = 2
For 4:4:4 estimates: W_ref = 4096, H_ref = 2160, FPS_ref = 60, F_ref = 3
Note: If the reference and target use the same
chroma format, then F_ref = F_target and the format factor cancels out.
For example, to estimate a 4:2:2 target mode, use the 4096 x 2160 @ 75 fps reference and scale by the ratio of reference pixels to target pixels. Keep the same chroma factor unless converting between chroma formats.