IP Block Automation - IP Block Automation - 3.0 English - PG447

This section takes a Versal AI Edge Series Gen 2 Embedded Common Platform Template as a reference design.

1. Once the design is created, add IP to the Block Design.
   Figure 1. Run Block Automation
2. Right-click on IP and Run Block Automation
   1. Choose the required configuration: Encoder Only, Decoder Only, or Encoder + Decoder, as shown in the following figure.
      Figure 2. Configuration of VCU2 Option
   2. Click OK.
3. The design will be generated based on the selected IP Block Automation.
   Figure 3. Block Design for Selected Configuration