The Wizard IP Customization AMD Vivado™ IDE is organized in four tabs:
- Wrapper Configuration
- Provides customization options for fundamental wizard features, including the transceiver type, Number of Quads, and Number of interfaces. It also provides the ability to select the Interface configurations such as direction, lanes, transmitter, and receiver settings.
- Quad Interface Mapping
- Provides tabular view of mapping the interface to the transceiver lanes. Also provides options to choose the master clock source for each interface.
- Structural Options
- Provides customization options to choose clocking helper blocks within the core or example design. It also provides options to enable the optional transceiver ports.
- INTF TX/RX Optional Port
- Provides options to choose optional ports for each Interface. This page has multiple selection options in case of multiple interface configurations. Provides flexibility to enable the ports based on the user application
Review each of the available options and modify them as needed so the resulting core instance meets your system requirements.
Component Name and Symbol
You can set the name of the generated IP in the Component Name field. The default name is gtwiz_versal_0. Use a name that is unique within your project. The IP symbol displays on the left-hand side of the IP Customization Vivado IDE, and by default, only displays enabled ports. The IP symbol updates based on your selections for structural options and INTF TX/RX optional ports.