Interrupt Enable Register (0x28) - Interrupt Enable Register (0x28) - 1.0 English - PG441

MIPI DSI-2 Receiver Subsystem LogiCORE IP Product Guide (PG441)

Document_ID
PG441
Release_Date
2026-07-27
Version
1.0 English

This register allows you to selectively enable each error/status bits in Interrupt Status register to generate an interrupt at output port. A IER bit set to ‘0’ does not inhibit an interrupt condition for being captured but reported in the status register.

Table 1. Interrupt Enable Register (0x28)
Bits Name Reset Value Access Description
31-22 Reserved NA NA Reserved
21 frame_start_received 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
20 word_count_corruption 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
19 incorrect_lane_configuration 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
18 Generic short packet FIFO full 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
17 Generic short packet FIFO not empty 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
16 stream_async_fifo_full 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
15 Reserved NA NA Reserved
14 lm_async_fifo_full 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
13 Reserved NA NA Reserved
12 stop_state 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
11 sot_error_lane4 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
10 sot_sync_error_lane4 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
9 sot_error_lane3 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
8 sot_sync_error_lane3 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
7 sot_error_lane2 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
6 sot_sync_error_lane2 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
5 sot_error_lane1 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
4 sot_sync_error_lane1 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
3 ecc2_bit_error 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
2 ecc1_bit_error 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
1 crc_error 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register
0 unsupported_data_type 0x0 RW Enable for interrupt, check the interrupt description in Interrupt status register