PROGRAMMABLE SEQUENCE DATA1 Register (0x40) - PROGRAMMABLE SEQUENCE DATA1 Register (0x40) - 1.0 English

PROGRAMMABLE SEQUENCE DATA1 Register (0x40) - PROGRAMMABLE SEQUENCE DATA1 Register (0x40) - 1.0 English - PG436

MIPI TX C-PHY/D-PHY LogiCORE IP Product Guide (PG436)

Document ID

PG436

Release Date

2025-11-20

Version

1.0 English

The Programmable Sequence data1 register is used to send the symbols 10 to 13 of programmable sequence. The following table provides the register bit description. This register is used in C-PHY configuration only.

Table 1. Programmable Sequence Data1 Register Bit Description
Bits	Name	Default Value	Access type	Description
[31:12]	Reserved	0x0	RO	Reserved
[11:9]	prog_seq_data13	0x3	R/W	S13 in the Programmable Sequence Values: 0 to 4: Symbol value 5 to 7: Invalid value, not a valid symbol value.
[8:6]	prog_seq_data12	0x3	R/W	S12 in the Programmable Sequence Values: 0 to 4: Symbol value 5 to 7: Invalid value, not a valid symbol value.
[5:3]	prog_seq_data11	0x3	R/W	S11 in the Programmable Sequence Values: 0 to 4: Symbol value 5 to 7: Invalid value, not a valid symbol value.
[2:0]	prog_seq_data10	0x3	R/W	S10 in the Programmable Sequence Values: 0 to 4: Symbol value 5 to 7: Invalid value, not a valid symbol value.