The following figure show the subsystem configuration screen.
Figure 1. Configuration Screen
- Component Name
- The Component name is used as the top-level wrapper file name for the core. The underlying netlist still retains its original name. Names must begin with a letter and must be composed from the following characters: a through z, 0 through 9, and "_". The name dprx_v1_0 is used as internal module name and cannot be used for the component name. The default is v_dp_rxss2_0.
- Pixels Per Clock (PPC) on output
- Selects the maximum pixels per clock on the output interface of the subsystem. The AXI4Stream and native output data widths/ports (mentioned in AXI4-Stream Video Stream Interface and Native Video Stream Interface) get scaled according to the value selected here.
- Video Interface
- Selects the AXI4-Stream or native for the input video interface.
- MST Streams
- Selects the maximum number of streams in MST mode.
- Lane Count
- Selects the maximum number of lanes.
- Bits Per Color
- Selects the desired maximum bit per component (BPC).
- Link Rate
- Selects the maximum link rate possible on the DP link in terms of Gb/s.
- Include AXI IIC
- Select to include AXI IIC in DisplayPort subsystem.
- Include Video EDID
- Video EDID to be included in the DP RX. Otherwise, the EDID from the IPI system is used.
- Enable HDCP 1.3 Decryption
- Enables the HDCP 1.3 decryption.
- Enable HDCP 2.3 Decryption
- Enables the HDCP 2.2/2.3 decryption.
- Enable SDP including Audio
- Enables the secondary data packet (SDP) support including audio.
- Audio Channels
- Selects the number of audio channels.
- AUX I/O Buffer location
- Selects the buffer location for AUX channel.
- AUX I/O Type
- Selects the Bidirectional or Unidirectional buffer type.