Reading LUT Data from Target LUT using the Auto-Increment LUT_ADDR Feature - Reading LUT Data from Target LUT using the Auto-Increment LUT_ADDR Feature - 1.1 English

Reading LUT Data from Target LUT using the Auto-Increment LUT_ADDR Feature - Reading LUT Data from Target LUT using the Auto-Increment LUT_ADDR Feature - 1.1 English - PG401

RFSoC DFE Non-Linear Filter LogiCORE IP Product Guide (PG401)

Document_ID

PG401

Release_Date

2026-06-23

Version

1.1 English

To read LUT data from the target LUT using the auto-increment LUT_ADDR feature, follow these steps:

Form LUT_TARGET data using UNIT_ID, LUT_ID as mentioned in the LUT_TARGET register format, and assign LUT_ADDR with zeros (starting address of LUT locations).
Set the target location by writing LUT_TARGET data to the LUT_TARGET register.
Read the LUT_DATA register 256 times.