The .xo file is a format of IP that can be used by the shell in the AMD Vitis™ accelerated flow. DPU IP files are released as .xo files. To generate the DPUCADF8H .xo files, follow these steps:
- Go to the DPUCADF8H-XO
path.
cd DPUCADF8H-XO/projects/ml_shell - Configure the board, the platform, and the frequency in the Makefile.
- Run the following
command.
make gen_xo
Currently, the DPUCADF8H supports four platforms as shown in the following table. For more information on platforms, refer to Alveo Data Center Accelerator Card Platforms User Guide (UG1120).
| Card | Platform | Available SLR | Maximum Instances Number |
|---|---|---|---|
| U200 | xilinx_u200_gen3x16_xdma_1 | SLR0/SLR2 | 2 |
| U250 | xilinx_u250_gen3x16_xdma_3_1 | SLR0/SLR2/SLR3 | 3 |