Figure 1. Configuration Tab
- Component Name
- Performance TG for Simulation
-
Synthesizable
Non-synthesizable
- AXI protocol
-
AXI3
AXI4
AXI4-Stream
Note: AXI3 is only available for the Non-Synthesizable TG. - Source ID
- The TG number must be specified here. Supports 0 to 127.
- AXI Data Width
- Supported widths are 32, 64, 128, 256, and 512.
- Enable Traffic Shaping
- Enables the traffic shaping module in the TG. The
trigger_out
andtrigger_in
ports will appear on the TG interface. - Enable Even Parity
- When enabled, even parity for AXI address and Write data is generated and
sent on the
AxUSER
andWUSER
signals respectively. - Enable NoC User Destination ID Ports
- NONE, READ, WRITE, READ_WRITE