The GT Info and Parameters tab shows the GT configuration information that is needed based on the DCMAC mode configured.
Figure 1. GT Info and Parameters Tab
- GT Type
- Enables the GT type for your configuration.
- GT RefClk
- Sets the GT RefClk in MHz.
- GT Pipeline Stages
- Select the number of pipeline stages between DCMAC and GT.
- Additional Options
- Enable Phase Aligned FIFO between DCMAC and GT. Selecting this option includes the Phase Aligned FIFO between DCMAC and GT. It is deselected and greyed out for static configuration; selected and greyed out for Dynamic Configuration.