The following table provides expected results for coarse and read latency parameters during DQS Preamble Detection. These values can be compared to the results found in hardware testing.
| XSDB Reg | Description |
|---|---|
| BRAM_DQSGATE_STG2_RLDLYRNK_CRSE_RANK*_BYTE* | Coarse tap values adjusted in range of 6 to 9 |
| BRAM_DQSGATE_READ_LAT_FINAL_BYTE* | Read Latency value last used during DQS Preamble Detection. Expected value is dependent on the PCB trace length but should be in the range CL-2 to CL+4. |
| BRAM_DQSGATE_RLDLYRNK_CRSE_FINAL_RANK*_BYTE* | Final coarse tap value. Expected values 6-13 only. |