The status of Write Leveling can also be determined by decoding the CAL_ERROR result according to the table below. Execute the Tcl commands noted in the Manually Analyzing the XSDB Output section to generate the XSDB output containing the signal results.
| Error Code | Description | Recommended Debug Step |
|---|---|---|
| 9 | Write leveling failed to find rising edge using coarse and fine offset. | For failures on the second rank of a multi-rank DIMM, check if the DIMM uses mirroring and make sure the design generated matches what the DIMM expects. Check the pinout and connections of the address/control bus, specifically A7 which is used to set the write leveling mode in the DRAM. |
| 10 | Write leveling failed in stable 0 confirmation stage. | Check the BISC values in XSDB (for the nibbles associated with the DQS) to determine the 90° offset value in taps. |
| 11 | Write leveling reached maximum taps to find noise width by incrementing DQS ODELAY. | Check the BISC values in XSDB (for the nibbles associated with the DQS) to determine the 90° offset value in taps. |