Revision History - Revision History - 3.4 English - PG352

Control Interfaces and Processing System LogiCORE IP Product Guide (PG352)

Document ID
PG352
Release Date
2025-06-11
Version
3.4 English

The following table shows the revision history for this document.

Section Revision Summary
06/11/2025 Version 3.4
Design Flow Steps Updated figures.
XRAM Added clarification on XRAM accessibility.
Device Security Added details on RED key clear option.
SD Configuration Added clarification about pin defaults.
ITAP and OTAP Delay Parameter Mapping Added parameter information.
11/13/2024 Version 3.4
Product Specification Updated block diagram.
Customizing and Generating the Core Added note about using the PMC Boot options.
Choosing a Design Flow Added clarification about CIPS presets.
PS-NoC Interfaces Added details about multi-SLR device interfaces.
PMC Power Domain Clocks Added new section.
05/30/2024 Version 3.4
CIPS Interactive Block Diagram Updated section.
High-Speed Debug Port (HSDP) Updated section.
Tamper Events/Response Configuration Updated section.
PS-NoC Interfaces Updated section.
10/18/2023 Version 3.4
CIPS Interactive Block Diagram Added new section.
Design Flow Steps Updated all figures.
PS-NoC Interfaces Updated section.
NoC Interfaces Updated section.
SD Configuration Added a table.
Upgrading Added a note.
05/16/2023 Version 3.3
Design Flow Steps Updated figures for CIPS v3.3.
Device Integrity Updated for new tamper and clock monitor features.
AXI4 I/O Compliant Interfaces Added a link to AR76566.
PS-NoC Interfaces Updated PS-NoC Interfaces section for new HSM1 clock port.
05/11/2022 Version 3.2
Design Flow Steps
10/27/2021 Version 3.1
Design Flow Steps Updated screens for CIPS 3.1.
Output Clocks Added LPD Top switch clocking restriction.
AXI4 I/O Compliant Interfaces Added ACE-Lite GUI information.
Boot Mode
  • Added CONFIG.PS_PMC_CONFIG parameter.
  • Deleted CONFIG.PS_USE_STARTUP parameter.
Upgrading Added appendix.
06/16/2021 Version 3.0
Design Flow Steps
Automation
  • Modified Board automation through Block automation.
  • Added support of LPDDR in Block Automation.
Tamper Events/Response Configuration Deleted Voltage Tamper event.
XilSEM Library Configuration Modified content for detect and correct soft errors.
12/04/2020 Version 2.1
Initial release. N/A