The HDMI 2.1 RX Subsystem enables you to customize the example design for your system requirements. The following table shows a summary of the hardware required for each targeted board, supported processors, topologies, and the corresponding AMD Vitis™ software platform import example options.
| Development Boards | Additional Hardware | Processor | Topology | Vitis Import Example |
|---|---|---|---|---|
| ZCU102/ZCU106 | HDMI 2.1 FMC (TB-FMCH-VFMC-HDMI) Daughter Card | A53 | Pass-Through | Passthrough_A53 |
| VCU118 | HDMI 2.1 FMC (TB-FMCH-VFMC-HDMI) Daughter Card | MicroBlaze™ | Pass-Through | Passthrough_Microblaze |
| ZCU106 | HDMI 2.1 FMC (TB-FMCH-VFMC-HDMI) Daughter Card | A53 | Pass-Through with Advance Features | Passthrough_A53 |
| VCK190 | HDMI 2.1 FMC (TB-FMCH-VFMC-HDMI) Daughter Card | A72 | Pass-Through | Passthrough_A72 |
| VEK280 | N/A | A72 | Pass-Through | Passthrough_A72_VEK |
| VEK385 (Rev B) | N/A | A78 | Pass-Through | PassThrough_A78 |
|
||||
Important:
AMD recommends using only
HDMI 2.1 Category 3 (ULTRA HIGH SPEED HDMI) certified cables for Fixed Rate Link Video
Receive/Transmit. The HDMI 2.1 FRL Mode is tested
with the Belkin 48 Gb/s HDMI 2.1 Ultra High Speed
HDMI (Category 3) cable.
Note: Contact Inervium/Tokyo Electron Device for HDMI 2.1 FMC
(TB-FMCH-VFMC-HDMI) Daughter Card (https://us.teldevice.com/product/tb-fmch-vfmc-hdmi/).
Note: For redriver information,
refer to the Onsemi NB7NQ621M or TI TMDS1204 data sheets.