Running the Reference Design (MicroBlaze) - Running the Reference Design (MicroBlaze) - 1.2 English - PG351

Use the following steps to execute the system using generated bitstream and software elf from the example design.

1. Launch the Xilinx System Debugger by selecting Start > All Programs > Xilinx Design Tools > Vivado <version> > Vivado <version> Tcl Shell.
2. In the AMD command shell window, change to the Example Design Project directory:

   Vivado% cd ./<IP instance name>_ex

3. Invoke Xilinx System Debugger (xsdb).

   Vivado% xsdb

4. Establish connections to debug targets.

   xsdb% connect

5. Download the bitstream to the FPGA.

   xsdb% fpga -file ./<IP instance name>_ex.runs/impl_1/exdes_wrapper.bit

6. Set the target processor.

   xsdb% target
     1* xcvu9p
     2  MicroBlaze Debug Module at USER2
     3  MicroBlaze #0 (Running)
   xsdb% target -set 3

7. Download the software .elf to the FPGA.

   xsdb% dow ./<vitis_workspace>/<application_name>_1/Debug/<application_name>_1.elf

8. Run the software.

   xsdb% stop
   xsdb% rst
   xsdb% con

9. Exit the XSDB command prompt.

   xsdb% exit