Build a Software Application Using the Unified Vitis IDE - 1.2 English - PG351

HDMI 2.1 Receiver Subsystem v1.2 Product Guide (PG351)

Document ID
PG351
Release Date
2024-12-11
Version
1.2 English
  1. Open the Unified Vitis IDE.
  2. To create a new platform component, under Embedded Development, select Create Platform Component.

  3. Set the desired component name, set the desired location to create the platform component, and click Next.

  4. Select the Hardware Design option, click Browse to navigate the XSA file from the design, and click Next.

  5. Click Next.

  6. Click Finish.

  7. To build/generate the platform, click Next.

  8. Under standalone, click Board Support Package.

  9. Click drivers.

  10. In Drivers, find v_hdmi_rxss1, and select Import Examples.

  11. An Import Examples window opens with a list of applications. Select the respective application and click OK (refer to the following figure). To select the respective application, refer to the Example Design Support Summary table in the Summary topic to select the respective application.

  12. Build the application.

    The example application is built, and an .elf file is ready to use.