User Interrupts - User Interrupts - 3.4 English - PG347

Versal Adaptive SoC CPM DMA and Bridge Mode for PCI Express Product Guide (PG347)

Document_ID
PG347
Release_Date
2026-07-31
Version
3.4 English
Table 1. User Interrupts Port Descriptions
Port Name I/O Description
dma<n>_usr_irq_valid I Valid

An assertion indicates that an interrupt associated with the vector, function, and pending fields on the bus should be generated to PCIe. Once asserted, dma<n>_usr_irq__vld must remain high until dma<n>_usr_irq_ack is asserted by the DMA.

dma<n>_usr_irq_vec [4:0] I Vector

The MSIX vector to be sent.

Vector starts from 0 to max 31. Vector 0 is 1st vector

dma<n>_usr_irq_in_fnc [12:0] I Function

The function of the vector to be sent.

dma<n>_usr_irq_ack O Interrupt Acknowledge

An assertion of the acknowledge bit indicates that the interrupt was transmitted on the link the user logic must wait for this pulse before signaling another interrupt condition.

dma<n>_usr_irq_fail O Interrupt Fail

An assertion of fail indicates that the interrupt request was aborted before transmission on the link.

The interrupt fail can happen for several reasons, for details, see the following MSIX Interrupt Options section.

Note: Maximum eight vectors are allowed per function.